GO-5100MP-USB – Advance Ultravision

Polarized (IMX250MZR) machine vision area scan camera

The GO-5100MP-USB is a compact industrial polarization area scan camera built around Sony’s IMX250MZR polarized CMOS sensor. It features 5.1 MP resolution, a frame rate of 74 fps and an innovative 4-way polarizing wire-grid design creating a range of new imaging possibilities in industrial machine vision, traffic imaging and surveillance.

SUMMARY

IMAGE SENSOR WITH POLARIZATION CAPABILITIES

Each image pixel incorporates one of four separate polarizing nano wire grids angled at 0°, 45°, 90°, and 135° arranged in a regular pattern across the sensor. Thus, each block of four pixels can be used as a calculation block to determine the angle and intensity of light in a scene.

ADVANCED IN-CAMERA PROCESSING FEATURES

In-camera processing algorithms calculate polarization angle, light ratio, and appearance with diffuse light removed. Other functions display diffuse light only (without polarization) and average light for each pixel, plus pseudo-color overlays on monochrome or gray-tone images.

USB3 VISION INTERFACE

The GO-5100MP-USB is equipped with a USB3 Vision interface enabling it to provide full 5.1 megapixel resolution (in 8-bit output) at up to 74 frames per second. 10-bit and 12-bit output is also supported.

FEATURES

5.1-megapixel camera featuring Sony IMX250MZR CMOS polarized sensor.
Four different polarizing nano wire grids (0°, 45°, 90°, 135°) applied to each 4-pixel block.
Outputs raw 5.1 megapixel mosaic image or decimated images from each polarizing angle.
Built-in functions to calculate polarization angle, ratio, and appearance with diffuse light removed.
Additional functions display diffuse light only (without polarization) and average for each pixel.
Advanced algorithms provide pseudo-color overlay over monochrome and over gray images for easier analysis.
8, 10, or 12-bit monochrome output.
Compact size and smart design.
USB3 Vision interface for plug-and-play convenience.
Single and Multi-ROI modes for flexible windowing and use of smaller optics.
Industrial grade performance with 80G shock, 10G vibration, and over 175,000 hrs. MTBF ratings.

SPECIFICATION

Product line	Go series
Model	GO-5100MP-USB
Type	Area scan
Color / Mono	Mono polarized
Light spectrum	Visible
Resolution	5.1 MP
Resolution (WxH)	2464 x 2056 px
Frame rate / line rate	74 fps
ROI	Yes
Interface	USB3 Vision (PoUSB)
Sensors	1XCMOS – Polarized
Sensor name	IMX250MZR
Optical format	2/3 inch
Cell size (WxH)	3.45 x 3.45 µm
Shutter type	Global shutter
Sensor diagonal	11.1 mm
Active sensor dimensions (WxH)	8.5 x 7.1 mm
Camera dimensions (HxWxL)	29 x 29 x 41.5 mm
Weight	46 g
Video output	8/10/12-bit(some video processing functions not available with 12-bit output)
Lens mount	C-Mount
Power consumption	4.35 watt
Operating temperature (ambient)	-5°C to +45°C

ACCESSORIES

PD-6 POWER SUPPLY	The PD-6U power supply can be used to power most Go Series cameras as an alternative to powering over the data interface. The power supply is RoHS compliant and conforms to key EMI and EMS standards. It is available in two versions: 1. *With 6-pin Hirose* connector to camera With flying leads that can be wired to the power lines on a separate I/O cable. 2. The power supply *converts 50 Hz to 60 Hz* AC input to 12V DC (13A) output. DOWNLOAD DATASHEET
MP-43 TRIPOD MOUNTING PLATE	Tripod adapter features mounting holes to fit spacing on Go Series housing. Standard 1/4-20 attachment to tripods. Includes M3 screws (Depth 5). Only use the supplied screws or other screws having the proper length. Using longer screws can damage internal circuit boards.
6P-02S POWER CABLE	The 6P-02S cable features flying leads on one end and a Hirose 6-pin connector on the other wired to match the pin-out of JAI Go Series cameras with 6-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras. The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems. DOWNLOAD DATASHEET
PC-6P HIROSE 6-PIN CONNECTOR	The HR10A-7P-6S is a universal connector used for power and control signals for most JAI Go Series cameras and also be used with serial communication (RS-232C) connectors on some CV Series models. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.