DFM 25G445-ML

  • 1/3 inch Sony CCD sensor (ICX445AQA)
  • 1,280×960 (1.2 MP), up to 30 fps
  • Global shutter
  • Trigger and I/O inputs
  • Manufactured by The Imaging Source
  • Windows and Linux software included
  • Catalog

SPECIFICATION

  • GENERAL BEHAVIOR
Sensitivity0.05 lx
Dynamic range8 bit
Video formats @ frame rate (maximum)1,280×960 (1.2 MP) RGB32 @ 30 fps
1,280×960 (1.2 MP) Y800 @ 30 fps
1,280×960 (1.2 MP) Y16 @ 30 fps
  • INTERFACE (OPTICAL)
Sensor typeCCD
Sensor specificationSony ICX445AQA
Shutterglobal
Format1/3 inch
Pixel sizeH: 3.75 µm, V: 3.75 µm
Lens mountM12x0.5
  • INTERFACE (ELECTRICAL)
InterfaceGigE
Supply voltage11 VDC to 13 VDC or POE: 48 VDC to 56 VDC
Current consumptionapprox 600 mA @ 12 VDC
InputTrigger and I/Os
  • INTERFACE (MECHANICAL)
DimensionsH: 45 mm, W: 45 mm, L: 20 mm
Mass10 g
  • ADJUSTMENTS
Shutter1/100,000 s to 30 s
Gain0 dB to 12 dB
White balance-2 dB to 6 dB
  • ENVIRONMENTAL
Temperature (operating)-5 °C to 45 °C
Temperature (storage)-20 °C to 60 °C
Humidity (operating)20 % to 80 % (non-condensing)
Humidity (storage)20 % to 95 % (non-condensing)

DOCUMENTATION

  • WHITEPAPERS ABOUT CAMERAS
Industrial Cameras: GigE Camera Start Up1.0March 23, 2018
Industrial Cameras: Spectral Sensitivity1.30November 15, 2017
Industrial Cameras: Getting Started with GigE Board Cameras1.0December 7, 2015
  • DIMENSIONAL DIAGRAMS
Dimensional Diagrams 2.0 for all Industrial Board Cameras2.0October 8, 2015
  • DATASHEETS FOR CCD SENSORS
Datasheet for Sony ICX445AQA CCD Sensor1.2September 15, 2012

SOFTWARE & DRIVERS

  • DEVICE DRIVERS
Device Driver for GigE Cameras3.5.0.4411July 24, 2019
  • SOFTWARE DEVELOPMENT KITS (SDKS)
IC Imaging Control .NET Component for C#, VB.NET, C++ Class Library for C++ projects3.4.0.2744October 23, 2018
IC 3D SDK – C, C++ library for stereo depth estimation1.1August 15, 2018
IC Imaging Control C Library3.4.0.51November 23, 2017
IC Imaging Control ActiveX3.2.0.0July 16, 2012
IC Imaging Control ActiveX Runtime Setup3.2.0.0July 16, 2012
  • PROGRAMMING SAMPLES
IC Barcode – 1D and 2D barcode reader for IC Imaging Control1.0.0.580November 2, 2018
IC Imaging Control – Sample Library3.3August 21, 2014
  • EXTENSIONS
LabVIEW Extension for IC Imaging Control3.4.0.41September 6, 2019
Cognex VisionPro AIK Plugin for IC Imaging Control3.4.2.0July 24, 2019
IC NeuroCheck Driver for NeuroCheck 6.11.1.0.69May 28, 2018
IC Matlab Plugin for Matlab R2013b and higher versions3.4.0.58November 23, 2017
TWAIN Source for IC Imaging Control3.0.0.124June 19, 2017
IC NeuroCheck Driver for NeuroCheck 6.01.0.0.51September 29, 2014
IC Matlab Plugin for Matlab 10.0 R20101.1.0.0July 29, 2013
  • END USER SOFTWARE
IC Express1.1.0.23July 24, 2019
IC Measure – manual on-screen image measurement and image acquisition2.0.0.161January 22, 2019
IC 3D – User friendly stereo calibration, depth estimation and 3D visualization1.1August 15, 2018
IC Capture – image acquisition2.4.642.2631February 9, 2017
Scan2Docx1.1.0.883February 3, 2015
Scan2Docx OCR1.1.0.883February 3, 2015
Footswitch software for IC Capture1.0.0.9September 22, 2014
IC Line Profiler1.1.0.9August 1, 2014
IC Fullscreen Presenter1.0.0.0June 6, 2014
  • SOFTWARE TOOLS
Hot Pixel Correction4.0.July 25, 2019
Processor Idle State Manager2.2.0.2March 12, 2014

ACCESSORIES

  • CABLES
CA-GigE/5/BLS

GigE cable
End 1: GigE (RJ-45)
End 2: GigE (RJ-45)
Locking screws
5 m in length
Manufactured by The Imaging Source
CA-GigE/10/BLS

GigE cable
End 1: GigE (RJ-45)
End 2: GigE (RJ-45)
Locking screws
10 m in length
Manufactured by The Imaging Source
GigE23/PWR/Trig

GigE cable
Designed for: PSU/Cinch23/EA
End 1: Trigger (Trigger in), Power (Power in)
End 2: Hirose (Hirose)
GigE 23 and 33 camera series only
0.2 m in length
Manufactured by The Imaging Source