- Strobe lighting.
- Overdrive specifications.
- Voltage control is allowed during the overdrive operation.
- It measures 150 x 320 x 116 mm (width x depth x height).
- External control through either Ethernet or parallel communications.
PRODUCT DETAILS
| Dimensions | W 150 mm x D 320 mm x H 116 mm |
|---|---|
| Number of channels | 4 channels |
| Lighting method | Strobe lighting (Overdrive (O/D) mode) or Continuous lighting (PWM mode) |
| Drive method | Constant lighting |
| Intensity control method | Variable-voltage control / PWM control |
| PWM frequency | 125kHz |
| Input voltage | 100 to 240 VAC (+10%, -15%) |
| Power consumption | 260 VA typ. |
| Output voltage | O/D Mode: 24 to 48 VDC PWM Mode: 24 VDC |
| Inrush current | 17 A (at 100 VAC), 40.8 A (at 240 VAC) from a cold start |
| Intensity control | Manual: Operation on the front panel External: Command input via TCP/IP or UDP/IP communications, Signal input through parallel port |
| Frequency | 50/60 Hz |
| Material | Steel sheet, Cover thickness: 1.6 mm Chassis thickness: 1.0 mm, N3 (leather tone) |
| Operating temperature and humidity | Temperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation) |
| Cooling method | Forced air cooling |
| Conformed standards | CE, RoHS |
| Output connector | SMP-03V-BC x 4、ELR-02V x 2 |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant],10-pins, Light Intensity and mode settings:RJ-45 |
| Weight | 3,300 g max. |
| Accessories | Instruction Guide, 2-m-long 3-prong AC power cord with ground terminal |
| Caution | Make sure that the total input current of the connected Light Units is no more than the output current of the Control Unit. |
DIMENSIONS (mm)
