- This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W.
- This Control Unit operates on a 100 to 240 VAC input and measures 84 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications.
PRODUCT DETAILS
| Dimensions | W 84 mm x D 82.6 mm x H 120 mm |
|---|---|
| Applicable Light Unit (output ratings) | Light Units with 24 VDC input Total for 3 channels: 28 W |
| Number of channels | 3 channels |
| Lighting method | Constant/Strobe lighting |
| Drive method | Constant lighting |
| Intensity control method | PWM control, Lighting time control |
| PWM frequency | 125kHz |
| Input voltage | 100 to 240 VAC (+10% -15%) |
| Power consumption | 78 VA |
| Output voltage | 24VDC |
| Output current | Total for 3 channels: 1.1 A |
| Inrush current | 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start |
| Intensity control | Manual: 256-step using the front setting switch External: 8-bit input (B0 to B7), write pulse (BRTWR), and channel selection (CHSEL0 to CHSEL2) |
| Error detection display | OCP’ is displayed on the Digital display |
| Error detection output | NPN transister output to the External control connector pins between 19(OC) and 20(OE); open for normal operation, closed for overcurrent detection. |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals. |
| Frequency | 50/60 Hz |
| Material | Alminium, ABS |
| Operating temperature and humidity | Temperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation) |
| Cooling method | Natural air-cooling |
| Conformed standards | CE, RoHS |
| Output connector | SMP-03V-BC x 3 |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: MIL connector (MIL-C-83503 compliant), 20 pins |
| Weight | 600 g |
| Accessories | 2m long 3-prong AC power cord with ground terminal, Instruction Guide |
DIMENSIONS (mm)
