PD3-5024-4-EI(A)

  • This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W.
  • Connection with the HLV3/HLV2-series Spot Lights is also available.
  • This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.

PRODUCT DETAILS

DimensionsW 197 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings)Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light)
Total for 4 channels: 46 W
Number of channels4 channels
Lighting methodConstant/Strobe lighting
Drive method24 V LIGHT connectors: Constant-voltage system,
HLV LIGHT connectors: Constant-current system
Intensity control method24V LIGHT connectors: PWM control and lighting time control,
HLV LIGHT connectors: Variable-current control
PWM frequency125kHz
Input voltage100 to 240 VAC (+10% -15%)
Power consumption70 VA
Output voltage24VDC
Output currentTotal for 4 channels: 1.91 A
Inrush current15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Intensity controlManual: 256-step using the front setting switch
External: Command input via TCP/IP or UDP/IP communication
Error detection displayDigital display on the front-panel;
OCP: Overcurrent error, EFN: Fan Stop Error,
and EID: ID error (HLV3/HLV2-series Spot Lights only)
Error detection outputCommand sent when overcurrent output is detected.
Over current protectionOperates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
*Do not intentionally short-circuit the positive and negative output terminals.
Frequency50/60 Hz
MaterialAlminium, ABS
Operating temperature and humidityTemperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation)
Storage temperature and humidityTemperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation)
Cooling methodForced cooling
Conformed standardsCE, RoHS
Output connectorSMP-03V-BC x 8
External control connectorTrigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: RJ-45 connector
Weight1,200 g
Accessories2m long 3-prong AC power cord with ground terminal, Instruction Guide, Brackets for the PD3-series Control Unit (BK-PD3) (including 2 brackets)

DIMENSIONS (mm)

CABLES

EXCB2-M10-3