_p.gif?t=20170530000000)
- This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 95 W.
- Connection with the HLV3/HLV2-series Spot Lights is also available.
- This Control Unit operates on a 100 to 240 VAC input and measures 220 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications.
PRODUCT DETAILS
| Dimensions | W 220 mm x D 82.6 mm x H 120 mm |
|---|---|
| Applicable Light Unit (output ratings) | Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light) Total for 8 channels: 95 W (EL connector: one 95 W connector) |
| Number of channels | 8 channels |
| Lighting method | Constant/Strobe lighting |
| Drive method | 24 V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system |
| Intensity control method | 24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control |
| PWM frequency | 125kHz |
| Input voltage | 100 to 240 VAC (+10% -15%) |
| Power consumption | 130 VA |
| Output voltage | 24VDC |
| Output current | 1.4 A (2 channels total) |
| Inrush current | 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start |
| Intensity control | Manual: 256-step using the front setting switch External: Command input via EIA-485 communication |
| Error detection display | Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV3/HLV2-series Spot Lights only) |
| Error detection output | Command sent when overcurrent output is detected. |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals. |
| Frequency | 50/60 Hz |
| Material | Alminium, ABS |
| Operating temperature and humidity | Temperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation) |
| Cooling method | Forced cooling |
| Conformed standards | CE, RoHS |
| Output connector | SMP-03V-BC x 16, ELR-02V x 1 |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: e-CON connector, 3 pins |
| Weight | 1,500 g max. |
| Accessories | 2m long 3-prong AC power cord with ground terminal, Instruction Guide, Brackets for the PD3-series Control Unit (BK-PD3) (including 2 brackets) |
DIMENSIONS (mm)
_e_s.gif)