_p.gif?t=20170530000000)
- This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W.
- Connection with the HLV3/HLV2-series Spot Lights is also available.
- It operates with 24 VDC input.
- It measures 197 x 82.6 x 120 mm (width x depth x height).
- External control through Parallel communications.
PRODUCT DETAILS
| Dimensions | W 197 mm x D 82.6 mm x H 120 mm |
|---|---|
| Applicable Light Unit (output ratings) | Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light) Total for 4 channels: 46 W |
| Number of channels | 4 channels |
| Lighting method | Constant/Strobe lighting |
| Drive method | 24 V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system |
| Intensity control method | 24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control |
| PWM frequency | 125kHz |
| Input voltage | 24 VDC (21.6 to 26.4 V) |
| Power consumption | 52 W |
| Output voltage | 24VDC |
| Output current | Total for 4 channels: 1.91 A |
| Intensity control | Manual: 256-step using the front setting switch External: 8-bit input (B0 to B7), write pulse (BRTWR), and channel selection (CHSEL0 to CHSEL2) |
| Error detection display | Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV3/HLV2-series Spot Lights only) |
| Error detection output | NPN transister output to the External control connector pins between 19(OC) and 20(OE); open for normal operation, closed for overcurrent detection. |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals. |
| Frequency | 50/60 Hz |
| Material | Alminium, ABS |
| Operating temperature and humidity | Temperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation) |
| Cooling method | Forced cooling |
| Conformed standards | CE, RoHS |
| Output connector | SMP-03V-BC x 8 |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: MIL connector (MIL-C-83503 compliant), 20 pins |
| Weight | 850 g |
| Accessories | Instruction Guide, Brackets for the PD3-series Control Unit (BK-PD3) (including 2 brackets) |
DIMENSIONS (mm)
_e_s.gif)