- This Strobe Unit can be used in combination with any one of the PD2-1012, PD2-3012, PD2-5012, and PD2-3012-2 or any one of the PD2-1024, PD2-3024, PD2-5024, and PD2-3024-2 Control Units.
- The light pulse width can be controlled between 0.01 and 99.99 ms in increments of 0.01 ms.
- This Strobe Unit measures 70 x 110 x 31 mm (width x depth x height).
PRODUCT DETAILS
| Dimensions | W 70 mm x D 110 mm x H 31 mm |
|---|---|
| Applicable Light Unit (output ratings) | Depends on the connecting Control Unit. |
| Number of channels | 1 channel |
| Input connector | Input connector: SMP-04V-BC (12 VDC or 24 VDC) Trigger input terminal: M3 terminal block 3P (Trigger input, FG connection) |
| Case material | Steel plate t1.0 |
| External control output | Connection to a jack of the PD2-series Control Unit (Center: Signal line, Sleeve: GND) |
| Lighting pulse width | 0.01 to 99.99 ms, Set with 4-digit thumbwheel switch, Resolution: 0.01 ms |
| Lighting delay | 10μs max. |
| Operating temperature and humidity | Temperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation) |
| Cooling method | Natural air-cooling |
| Conformed standards | CE, RoHS |
| Output connector | SMP-02V-BC (1: Output(+), 2: Output(-)) SMP-03V-BC (1: Output(+), 2: NC, 3: Output(-)) M3.5 jack (ON/OFF signal, Center: Signal line, Sleeve: GND) |
| Trigger | Photo-coupler insulated input: 5 to 24 VDC Current: 5 mA max., Pulse width: 20μ min. Wave rise/fall: 10μs max. (Ambiguous wave pattern is not allowed.) |
| Weight | 400 g max. |
| Accessories | ON/OFF control cable, Instruction Guide, Power cable (12 VDC), Power cable (24 VDC) |
DIMENSIONS (mm)
