PD2-3024-4(A)

  • This 4-channel Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 27 W.
  • It operates with 100 to 240V AC input.
  • It measures 110 x 170 x 80 mm (width x depth x height).

PRODUCT DETAILS

DimensionsW 110 mm x D 170 mm x H 80 mm
Applicable Light Unit (output ratings)24 V/27 W
Number of channels4 channels
Lighting methodContinuous lighting
Drive methodConstant lighting
Intensity control methodPWM control
PWM frequency62.5 kHz
Input voltage100 to 240 VAC
Power consumption78 VA typ.
Output voltage24VDC
Output current1.1 A (total for 4 channels)
Inrush current15 A (at 100 VAC) *From a cold start
Intensity controlUse of the intensity control knobs on the front panel (Coarse and Fine, 16 steps for each knob)
Error detection displayThe Error indicator lamp on the front panel is lit when overcurrent is detected
Error detection outputExternal control connector 12 pin (OCP): Open in normal condition, Open-collector ON when an overcurrent is detected.
Over current protectionOperates at 107% min. Automatically reset, or manually reset by turning power OFF then ON again.
Frequency50/60 Hz
External control inputInsulation: Not insulated with a Control Unit
Circuit: Pull-up of +5 V internally by use of resistor (2.2 kΩ), HS-CMOS input
MaterialSteel plate t1.0
Operating temperature and humidityTemperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation)
Storage temperature and humidityTemperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation)
Cooling methodNatural air cooling
Conformed standardsCE, RoHS
Output connectorSMP-03V-BC (1: Output(+), 2: NC, 3: Output(-)) x 4
External control connectorExternal control: 25-pin D-sub plug with M2.6 mm screws
Weight1,200 g
Accessories2m long 3-prong AC power cord with ground terminal, Instruction Guide, Optional Cable Operation Guide

DIMENSIONS (mm)

CABLES

EXCB2-25-3