LEDs are mounted perpendicularly on a line-shaped board and arranged in a ring facing horizontally.
The thin design has a thickness of only 10 mm.
These Ring Lights are used extremely close to the workpiece.
FEATURES
- Illuminating closest to the workpiece
Allows for illuminating closer to the workpiece than the LDR2-LA series. Perfect for imaging of minute unevenness, damage, or engraved characters.
Imaging example for the LDR-206SW2-LA1:Exterior imaging of food containers
- LEDs mounted horizontally
Achieved a thin device that is 10 mm thick by mounting LEDs horizontally in one line. Helps save space because it can be installed near the workpiece.
Cross-section image of the LDR-146-LA1
- Example configuration
LEDs are arranged facing horizontally in a ring shape. It can be used extremely close to the workpiece.
LDR-146-LA1
CHARACTERISTICS / DATA
- Data: Relative irradiance graph and uniformity (Representative example)
※ The data included is for reference only and does not guarantee the quality of this product.
LDR-75RD2-LA1
- LED properties
Spectral distribution
Directionalcharacteristics
Be sure to read the “Instruction Guide” included with the product before use and follow the safety precautions upon use.
The data included is for reference only. Actual values may vary.
CUSTOM ORDER EXAMPLE
IMAGING EXAMPLE
- Exterior imaging of a plastic case surface
| Description | Visual inspection |
|---|---|
| Workpiece | Plastic case |
| Conventional lighting | Interior lamp |
| New lighting | LDR-146BL2-LA1 |
| Result | Extracting the damage |
- Exterior imaging of button cell batteries
| Description | Visual inspection |
|---|---|
| Workpiece | Button cell battery |
| Conventional lighting | LED Ring Light |
| New lighting | LDR-75RD2-LA1 |
| Result | Extracting the damage |
