PD3-3024-3-ET(A)

  • This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W.
  • It operates with 24 VDC input. It measures 84 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.

PRODUCT DETAILS

DimensionsW 84 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings)Light Units with 24 VDC input
Total for 3 channels: 28 W
Number of channels3 channels
Lighting methodConstant/Strobe lighting
Drive methodConstant lighting
Intensity control methodPWM control, Lighting time control
PWM frequency125kHz
Input voltage24 VDC (21.6 to 26.4 V)
Power consumption32 W
Output voltage24VDC
Output currentTotal for 3 channels: 1.1 A
Intensity controlManual: 256-step using the front setting switch
External: Command input via TCP/IP or UDP/IP communication
Error detection displayOCP’ is displayed on the Digital display
Error detection outputCommand sent when overcurrent output is detected.
Over current protectionOperates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
*Do not intentionally short-circuit the positive and negative output terminals.
Frequency50/60 Hz
MaterialAlminium, ABS
Operating temperature and humidityTemperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation)
Storage temperature and humidityTemperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation)
Cooling methodNatural air-cooling
Conformed standardsCE, RoHS
Output connectorSMP-03V-BC x 3
External control connectorTrigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: RJ-45 connector
Weight400 g
AccessoriesUser Manual

DIMENSIONS (mm)

CABLES

EXCB2-M10-3

OPTIONS

BK-PD3