PD3-5024-3-PT

  • This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 48 W.
  • It operates with 24 VDC input.
  • It measures 84 x 82.6 x 120 mm (width x depth x height).
  • External control through Parallel communications.

PRODUCT DETAILS

DimensionsW 84 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings)Light Units with 24 VDC input
Total for 3 channels: 48 W
Number of channels3 channels
Lighting methodConstant/Strobe lighting
Drive methodConstant lighting
Intensity control methodPWM control, Lighting time control
PWM frequency125kHz
Input voltage24 VDC (21.6 to 26.4 V)
Power consumption52 W
Output voltage24VDC
Output currentTotal for 3 channels: 1.9 A
Intensity controlManual: 256-step using the front setting switch
External: 8-bit input (B0 to B7), write pulse (BRTWR), and channel selection (CHSEL0 to CHSEL2)
Error detection displayOCP’ is displayed on the Digital display
Error detection outputNPN transister output to the External control connector pins between 19(OC) and 20(OE); open for normal operation, closed for overcurrent detection.
Over current protectionOperates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
*Do not intentionally short-circuit the positive and negative output terminals.
Frequency50/60 Hz
MaterialAlminium, ABS
Operating temperature and humidityTemperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation)
Storage temperature and humidityTemperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation)
Cooling methodNatural air-cooling
Conformed standardsCE, RoHS
Output connectorSMP-03V-BC x 3
External control connectorTrigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: MIL connector (MIL-C-83503 compliant), 20 pins
Weight400 g
AccessoriesUser Manual

DIMENSIONS (mm)

CABLES

OPTIONS