PCI Express x8 Camera Link Frame Grabber
- 12 volts @ 120 mA, 3.3 volts @ 720 mA
- 13.1 cm long, 10.6 cm high, 5.15″ long, 4.15″ high
- 102 grams, 3.6 ounces
- 0 to 70 degrees Celsius operation
- CE, FCC, ROHS compliant
- Camera pixel clock frequencies from 20 to 85 MHz
- Made in U.S.A.
FEATURES
- PCIe x8 frame grabber
- Operates in PCI express bus x16 or x8 slot
- 20 gigabit per second burst DMA transfer rate
- 850 megabytes per second sustained transfer rate
- Power over Camera Link selectable
- Two 26-pin MDR Camera Link connectors
- 64-bit memory addressing
IMAGE CAPTURE
- Base, medium, full, or 80-bit camera
- Two base cameras
- Line scan or area scan cameras
- Monochrome or color cameras
- Individual lines or frames
- Triggered image sequence
TRIGGER, STROBE AND I/O SIGNALS
- Camera exposure and asynchronous reset control
- Trigger and frame enable inputs
- Strobe output
- General purpose inputs and outputs
SPECIFICATIONS
| Signal Input & Output | EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz. |
| Performance (Camera Link) | Supports the camera’s maximum: – Horizontal Resolution – Vertical Resolution – Frame Rate – Bit Depth |
| Connections | – Two 26-pin 3M MDR Camera Link connectors for Full, Medium, and Base. – 10-pin header for Trigger, Frame Enable, and Strobe. – 10-pin header for General Purpose Inputs and Outputs. |
| Bus Requirements | – PCI Express x8 Bus slot – Operates in PCI Express Bus x16 or x8 slot |
| Power Requirements | – 12 V @ 120 mA – 3.3 V @ 720 mA – Total 3.816 Watts |
| Dimensions | 13.08 cm long by 10.55 cm high (5.15″ long x 4.153″ high) |
| Certifications | CE. FCC, & ROHS Compliant |
| EPIX SOFTWARE Support | – Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and PXIPL. – Compatible with 32-bit & 64-bit Windows 11, 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible. – Windows Media Foundation Frame Server (DirectShow) and Video for Linux (V4L2) source drivers are distributed with all versions of XCAP. |
SOFTWARE
- XCAP-Lite image capture, display, and save program included with frame grabber purchase
- XCAP-LTD captures video to computer memory
- XCAP-STD streams video to disk and performs image processing
- XCAP supports all camera link cameras connected to PIXCI® frame grabbers
- XCLIB programmer libraries for frame grabber and camera control
- PXIPL image processing, measurement, and analysis libraries
- Windows & Linux, 32 & 64-bit
- TWAIN compatible