SILICON VIDEO 2112C

SILICON VIDEO® 2112C color camera, from EPIX, Inc., features an active programmable array resolution of 1288 x 1032 pixels, with sub-windowing, sub-sampling, mirror and flip modes, 10 bit dynamic range, and frame rates exceeding 290 Hz (at reduced resolution). XCAP™ software provides control of all sensor features.

PIXEL CLOCK AND FRAME RATE

The SILICON VIDEO 2112C camera is driven by a variable frequency pixel clock that can be set over a range of 1 MHz to 46 MHz. For any resolution and decimation setting, an increase in the pixel clock frequency will provide a higher frame rate. For example, capture a 1288 x 1032 image @ 0.5 fps using a 1MHz pixel clock – or capture a 1288 x 1032 image at 26 fps using a 46 MHz pixel clock. With a resolution of 320×258, capture 6.5 fps @ 1MHz, or 291 fps @ 46 MHz.

ONLY ONE CABLE

One cable connects the SILICON VIDEO® 2112C camera to the PIXCI® D2X. The PIXCI® D2X provides power to the camera, sends and receives camera control signals, and receives video data. There is no need for a separate camera power supply and cable.

CAMERA ADJUST MENU

The XCAP™ Imaging Application provides a camera control menu to select pixel clock frequency, integration/exposure time, decimation (sub-sampling) and trigger control. The color camera menu provides automatic white balance as well as manual adjustment of Red, Green, and Blue gain.

There are five 1/4″ 20 (standard) tripod mounting holes centered horizontally / vertically in the top and two sides of the camera body – there are two mounting holes in the bottom. These holes are centered 7.6mm from the front of the camera. Camera Side View showing front-to-back clearances for camera body, cable connections, and for the flexible interface cable.

Weight:
Only 181 Grams or 5.8 Ounces

Sensor:
Zoran ZR32112PLC (Color)

Imaging Board:
D2X-SV2112C

Optics:
1″ C-Mount Lens with 17.526mm Flange Distance