Xcelera-CL+ PX8 Full

The X64 Xcelera-CL+ PX8 Full is a Camera Link frame grabber that is based on the PCI Express x8 interface. Compatible with a Base, Medium or Full Camera Link® camera, the X64 Xcelera-CL+ PX8 Full supports a wide variety of multi-tap area and line scan colour and monochrome cameras. For greater versatility, the X64 Xcelera-CL+ PX8 Full board can interface with advanced Camera Link camera output formats including 10-taps of 8-bit/pixel or 8-taps of 10-bit/pixel at 85MHz pixel clock rates.

The X64 Xcelera-CL+ PX8 Full has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the host, providing traceability when errors do occur and permitting recovery from those errors.

Specifications

Part NumberOR-X8C0-XPF00
Board TypePCIe
Host BusPCIe Gen1 x8
Board InterfaceCamera Link
ConnectorsData: 2xSDR CameraLink
Controls:
* 1xCMD151x 40-pin shrouded header
* 1x 4-pin connector for multi-board synchronization
Camera Format1 x CameraLink Base, Medium, Full or 80-bit
Pixel Clock20 to 85 MHz
Bits per Pixel8, 10, 12, 14 and 16-bit/pixel
Number of Camera Taps1 Tap – 8/10/12/14/16-bit mono2 Taps – 8/10/12/14/16-bit mono3 Taps – 8-bit mono; 8/10/12-bit RGB4 Taps – 8/10/12-bit mono; 14/16-bit mono8 Taps – 8-bit mono80-bit mode (DECA):10 Taps – 8-bit mono8-Taps – 10-bit mono 
GPIO4-opto in/4-opto out
Camera Control2 x External Trigger input, Strobe out, Quadrature Encoder, Mulit-board Sync.
Frame Buffer256 MB
FeaturesPoCL ILUTs, Dead Pixel, Flat Field, Flat Line, Bayer
SoftwareSapera LT SDK, Sapera Vision Software
OS SupportWindows 7 (32-bit), Windows 7 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 10 (32-bit), Windows 10 (64-bit)
DocumentXcelera-CL+ PX8 Full Datasheet