Embedded Camera Link Image Processing System
- 12 volt at 900 mA
- 4.5 inches square (114.3 mm)
- 0 to 70 degrees centigrade operation
- Camera pixel clock frequencies from 20 to 85 MHz
- Made in U.S.A.
FEATURES
- PCI Express 2.0 x4 frame grabber
- 20 gigabit per second DMA burst transfer rate
- 1400 megabytes per second sustained transfer rate
- Two or four 26-pin MDR Camera Link connectors
- 64-bit memory addressing
IMAGE CAPTURE
- Four base; two medium, full, or 80-bit camera(s)
- Monochrome or color cameras
- Individual lines or frames
- Continuous video
- Triggered sequence
TRIGGER, STROBE AND I/O SIGNALS
- Camera exposure and asynchronous reset control
- Trigger and frame enable inputs
- Strobe output
- General purpose inputs and outputs
SPECIFICATIONS
| Signal Input & Output | EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz. |
| Performance | Supports the camera’s max resolution, frame rate, and bit depth up to 1390 megabytes per second data transfer rate. |
| Connections | – Two 26 pin MDR Camera Link connectors for up to Base cameras or one 80-Bit, Full, or Medium cameras. – Add the optional bracket with two additional MDR connectors and internal cables to connect a second 80-Bit camera, or a second Medium or Full camera, or a third and fourth Base camera. – Two 10 pin headers for trigger inputs and strobe outputs. – One USB 3.0 TYPE A. – One USB 2.0 Micro AB. – One HDMI Connector. – One Gigabit Ethernet port. |
| Power Requirements | 12 volt at 900 mA |
| Dimensions | 114.3 mm long x 114.36 mm wide x 41.7mm high with TX2 and heatsink (4.5″ long x 4.5″ wide x 1.64″ high) |
| Certifications | ROHS Compliant |
| EPIX SOFTWARE Support | – Supported by XCAP-Lite (no charge with board purchase), XCLIB, and PXIPL. – Compatible with 64-bit LINUX. |