PCI Express 2.0 x1 Base Camera Link Frame Grabber
- 12 V @ 190 mA, 3.3 V @ 130 mA
- Average power consumption: 2.709 Watts
- 8.38 cm long, 6.88 cm high, 3.30” long by 2.71” high
- 48 grams, 1.7 ounces
- 0 to 70 degrees Celsius operation
- CE, FCC, & ROHS Compliant
- Accepts camera pixel clocks from 20 to 85 MHz
FEATURES
- PCIe x1 Gen 2 low-profile desktop frame grabber
- Operates in any PCI Express slot
- 5 gigabit per second burst transfer rate
- 409 megabytes per second sustained transfer rate
- One 26-pin MDR Camera Link connector
- Image data DMA transferred to motherboard memory
- 64-bit memory addressing
CAPTURE
- From a Base Camera Link camera
- From line scan or area scan cameras
- From monochrome or color cameras
- Individual lines or frames
- Continuous video
- Triggered image sequences
TRIGGER AND I/O
- Camera exposure and asynchronous reset control
- Trigger and frame enable inputs
- Strobe output
- General purpose inputs and outputs
OPTIONS
- Standard or low-profile bracket available
- Optional standard height bracket with Dsub for trigger,etc.
SPECIFICATIONS
| Signal Input & Output | EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz |
| Performance | Supports the camera’s maximum: – Horizontal Resolution – Vertical Resolution – Frame Rate – Bit Depth |
| Connections | – One 26-pin 3M MDR Camera Link connector for Base. – 9-pin connector for Trigger, Frame Enable, Strobe, and General Purpose I/O. – Camera Link cables available. |
| Data Transfers | – Supports cameras with data output rates up to 409 MBytes/second (performance may vary depending on computer system capabilities) – 64-bit memory addressing |
| Bus Requirements | – PCI Express x1 Gen 2 or better slot. – Operates in PCI Express x16, x8, x4, or x1 slot. |
| Dimensions | 8.38 cm long by 6.88 cm high (3.30″ long x 2.71″ high) |
| Certifications | – CE Compliant – ROHS Compliant |
| EPIX SOFTWARE Support | – Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and PXIPL. – Compatible with 32-bit & 64-bit Windows 11, 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible. – Windows Media Foundation Frame Server (DirectShow) and Video for Linux (V4L2) source drivers are distributed with all versions of XCAP. |
SOFTWARE
- XCAP-Lite image capture, display, and save program included with frame grabber purchase
- XCAP-LTD captures video to computer memory
- XCAP-STD streams video to disk and performs image processing
- XCAP supports all camera link cameras connected to PIXCI® frame grabbers
- XCLIB programmer libraries for frame grabber and camera control
- PXIPL image processing, measurement, and analysis libraries
- Windows & Linux, 32 & 64-bit
- TWAIN compatible