- 1/2.5 inch Aptina CMOS sensor (MT9P031)
- 2,592×1,944 (5 MP), up to 15 fps
- Rolling shutter
- Trigger and I/O inputs
- Casing compatible to most analog cameras
- Manufactured by The Imaging Source
- Windows and Linux software included
- Catalog
SPECIFICATION
- GENERAL BEHAVIOR
Vision standard | GigE Vision |
Sensitivity | 0.05 lx |
Dynamic range | 8/12 bit |
Video formats @ frame rate (maximum) | 2,592×1,944 (5 MP) RGB32 @ 15 fps 2,592×1,944 (5 MP) Y800 @ 15 fps 2,592×1,944 (5 MP) Y16 @ 15 fps |
- INTERFACE (OPTICAL)
Filter using | IR cut filter |
Sensor type | CMOS |
Sensor specification | Aptina MT9P031 |
Shutter | rolling |
Format | 1/2.5 inch |
Pixel size | H: 2.2 µm, V: 2.2 µm |
Lens mount | C/CS |
- INTERFACE (ELECTRICAL)
Interface | GigE |
Supply voltage | 11 VDC to 13 VDC or POE: 48 VDC to 56 VDC |
Current consumption | approx 400 mA @ 12 VDC |
Input | Trigger and I/Os |
- INTERFACE (MECHANICAL)
Dimensions | H: 29 mm, W: 29 mm, L: 57 mm |
Mass | 65 g |
- ADJUSTMENTS
Shutter | 1/20,000 s to 30 s |
Gain | 0 dB to 12 dB |
White balance | -2 dB to 6 dB |
- ENVIRONMENTAL
Temperature (operating) | -5 °C to 45 °C |
Temperature (storage) | -20 °C to 60 °C |
Humidity (operating) | 20 % to 80 % (non-condensing) |
Humidity (storage) | 20 % to 95 % (non-condensing) |
DOCUMENTATION
- WHITEPAPERS ABOUT CAMERAS
Industrial Cameras: GigE Camera Start Up | 1.0 | March 23, 2018 |
Industrial Cameras: Spectral Sensitivity | 1.30 | November 15, 2017 |
Industrial Cameras: 23/33/Z12/Z30 Series – Trigger and I/O | 1.6 | April 28, 2017 |
Industrial Cameras: GigE CCD and CMOS 23 Series – Power Supply | 1.2 | August 14, 2012 |
- DIMENSIONAL DIAGRAMS
Dimensional Diagrams for 21, 22, 23, 24, 42, 72, Autofocus and Zoom Series | 1.14 | December 15, 2017 |
- DATASHEETS FOR CMOS SENSORS
Datasheet for Aptina MT9P031 (Rev. G) CMOS Sensor | 1.2 | June 17, 2014 |
SOFTWARE & DRIVERS
- DEVICE DRIVERS
Device Driver for GigE Cameras | 3.5.0.4411 | July 24, 2019 |
- SOFTWARE DEVELOPMENT KITS (SDKS)
IC Imaging Control .NET Component for C#, VB.NET, C++ Class Library for C++ projects | 3.4.0.2744 | October 23, 2018 |
IC 3D SDK – C, C++ library for stereo depth estimation | 1.1 | August 15, 2018 |
IC Imaging Control C Library | 3.4.0.51 | November 23, 2017 |
IC Imaging Control ActiveX | 3.2.0.0 | July 16, 2012 |
IC Imaging Control ActiveX Runtime Setup | 3.2.0.0 | July 16, 2012 |
- PROGRAMMING SAMPLES
IC Barcode – 1D and 2D barcode reader for IC Imaging Control | 1.0.0.580 | November 2, 2018 |
IC Imaging Control – Sample Library | 3.3 | August 21, 2014 |
- EXTENSIONS
Cognex VisionPro AIK Plugin for IC Imaging Control | 3.4.2.0 | July 24, 2019 |
LabVIEW Extension for IC Imaging Control | 3.4.0.40 | November 29, 2018 |
IC NeuroCheck Driver for NeuroCheck 6.1 | 1.1.0.69 | May 28, 2018 |
IC Matlab Plugin for Matlab R2013b and higher versions | 3.4.0.58 | November 23, 2017 |
TWAIN Source for IC Imaging Control | 3.0.0.124 | June 19, 2017 |
IC NeuroCheck Driver for NeuroCheck 6.0 | 1.0.0.51 | September 29, 2014 |
IC Matlab Plugin for Matlab 10.0 R2010 | 1.1.0.0 | July 29, 2013 |
- END USER SOFTWARE
IC Express | 1.1.0.23 | July 24, 2019 |
IC Measure – manual on-screen image measurement and image acquisition | 2.0.0.161 | January 22, 2019 |
IC 3D – User friendly stereo calibration, depth estimation and 3D visualization | 1.1 | August 15, 2018 |
IC Capture – image acquisition | 2.4.642.2631 | February 9, 2017 |
Scan2Voice | 2.4.2.960 | June 21, 2016 |
Scan2Docx | 1.1.0.883 | February 3, 2015 |
Scan2Docx OCR | 1.1.0.883 | February 3, 2015 |
Footswitch software for IC Capture | 1.0.0.9 | September 22, 2014 |
IC Line Profiler | 1.1.0.9 | August 1, 2014 |
IC Fullscreen Presenter | 1.0.0.0 | June 6, 2014 |
- SOFTWARE TOOLS
Hot Pixel Correction | 4.0. | July 25, 2019 |
Processor Idle State Manager | 2.2.0.2 | March 12, 2014 |
ACCESSORIES
- CABLES
CA-GigE/5/BLS | GigE cable End 1: GigE (RJ-45) End 2: GigE (RJ-45) Locking screws 5 m in length Manufactured by The Imaging Source |
CA-GigE/10/BLS | GigE cable End 1: GigE (RJ-45) End 2: GigE (RJ-45) Locking screws 10 m in length Manufactured by The Imaging Source |
GigE23/PWR/Trig | GigE cable Designed for: PSU/Cinch23/EA End 1: Trigger (Trigger in), Power (Power in) End 2: Hirose (Hirose) GigE 23 and 33 camera series only 0.2 m in length Manufactured by The Imaging Source |