High Power Strobe Lights PF Series.
Ring type.
Peak illuminance achieves 6.5 million lx.
Realizes high-speed and accurate inspection.
Solves your xenon flash lamp problems.
Freely adjustable flash timing enables strobing within the exposure period of the camera.
FEATURES
- Extreme power strobe lights
Extremely powerful strobe lighting improves productivity through increased inspection speed.
Image comparison: conventional product vs. PF series
- Brightness comparable to xenon flash lamps
Achieves the same inspection speed as xenon lamps.
- Example Configuration
LDR-PF-75
- Advantages Over Xenon Lamps
CHARACTERISTICS / DATA
- DATA: RELATIVE IRRADIANCE GRAPH AND UNIFORMITY (REPRESENTATIVE EXAMPLE)
*The data included is for reference only. Actual values may vary.
LDR-PF-75
- LIGHT SPECTRUM
Be sure to read the “Instruction Guide” included with the product before use and follow the safety precautions upon use.
The data included is for reference only. Actual values may vary.
IMAGING EXAMPLE
- EXTERNAL IMAGING OF DRILL TIP
- EXTERNAL IMAGING OF CHIP COMPONENT
USAGE
- USING THE FLASH AS A CAMERA SHUTTER
- ELIMINATING IMAGE BLUR
Horizontal blur
Vertical blur
- FREELY ADJUSTABLE FLASH TIMING
You can use the lighting delay time setting of the Control Unit to adjust the timing of the flash to be within the exposure period of the camera.
DEDICATED CONTROL UNITS
- MAXIMIZE THE PERFORMANCE OF HIGH POWER STROBE UNITS
PF-A4048-2 (2 channels)
- Light intensity: 512 levels
- Strobe time: 1 to 100 μs
- Lighting delay: 0 to 100 μs (in steps of 0.1 μs)
- Compatible with Ethernet and parallel communications
- Selectable light intensity ranges, etc.
PF-A16048-4 (4 channels)
- Light intensity: 512 levels
- Strobe time: 1 to 500 μs
- Lighting delay: 0 to 100 μs (in steps of 0.1 μs)
- Compatible with Ethernet and parallel communications
- Selectable light intensity ranges
You can make the Light Units on more than one channel flash linked to a trigger signal that is input through one of the pins in the trigger input connector.