- This 2-channel Strobe Control Unit can be connected to 12V LED Light Units within a total power consumption of 27 W.
- It operates on a 100 to 240 VAC input and measures 110 x 170 x 90 mm (width x depth x height).
PRODUCT DETAILS
| Dimensions | W 110 mm x D 170 mm x H 90 mm |
|---|---|
| Applicable Light Unit (output ratings) | 12 V/27 W (total for 2 channels) |
| Number of channels | 2 channel |
| Lighting method | Strobe lighting |
| Drive method | Constant lighting |
| Intensity control method | Lighting time control |
| Output voltage | 18V DC |
| Output current | 8.1 A max. |
| Inrush current | 26 A (at 100 VAC)/63 A (at 240 VAC) *From a cold start |
| Frequency | 50/60 Hz |
| External control input | Parallel 4 bits/channel, 5V-CMOS level input, pull-up resistance of 4.7Ω Low level: 1.13V max, High level: 3.15V min. |
| Lighting pulse width | 10μs to 990μs: Set with the light pulse width setting switch and the intensity control knob on the front panel. Lighting time = Pulse Width x Control Light pulse width: 0 to 99 x 10μs (external mode only) Control: 10 to 100% (in 10% steps) |
| Lighting delay | 15μs max. |
| Material | Steel plate t1.0 |
| Operating temperature and humidity | Temperature: 0 to 40℃, Humidity: 20% to 85%RH (with no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60℃, Humidity: 20% to 85%RH (with no condensation) |
| Cooling method | Natural air-cooling |
| Conformed standards | CE, RoHS |
| Output connector | SMP-02V-BC (1: Output(+), 2: Output(-)) x 2 pieces |
| External control connector | External control: 25-pin D-sub plug with M2.6 mm screws x 1 piece |
| Trigger | Trigger mode: Int/Ext (Both channels are changed simultaneously.) Int (Internal trigger): 1.42 ms cycle, Lighting time of 10 to 100μs (Used for operation confirmation) Ext (External trigger): Photo-coupler input, Current of 5 mA max., Pulse width of 20μs min., Wave rise/fall of 10μs max. (Ambiguous wave pattern is not allowed.), Operable trigger input cycle of 14.2 ms min. (When the pulse width setting switch is set to 99.) |
| Trigger output | Trigger input ON: High pulse output with 5V CMOS signal 8: Trig1 OUT, 9: Trig2 OUT, 10: GND |
| Weight | 1200 g |
| Accessories | 2m long 3-prong AC power cord with ground terminal x 1, External connector x 1 Instruction Guide x 1 |
DIMENSIONS (mm)
_e_s.gif)